Products Currently Available From Online
Catalog: |
|
MADE IN USA
|
Depth
Gages
Dial,
Series 640, 640M,
643, 644 & 644M
|
FEATURED BRAND |
|
|
|
|
|
|
 |
| Features: |
- Direct
reading tools, referencing from their hardened and ground
bases.
- All
bases are 2-1/2 in.
(64mm) long.
- Quicker
and more convenient to use than any other type of depth
age within their ranges and accuracy.
|
|
| No. 640 |
The contact is
slightly up into the base at rest. In action, the inspector sets the
contact at zero, which is usually at the bottom of the base. Then
the top button is pushed down to contact the work and the measurement
is taken. Gages feature a Starrett No. 25-431 AGD dial indicator
|
| No. 640R |
The gages are
the same as the No. 640 except they have reverse movement and can
easily be used with one hand. SImply set on zero and apply the contact
to the work and read the measurement.
|
| No. 643 |
This gage has
a knife-edge base and a needle point contact which has been hardened
and ground. The knife-edge base has a cut-out so the conical point
can be precisely positioned for close work. Point is 1/2 in. (12.7mm)
long with a 40° included angle.
|
| No. 644 |
| These gages are
for longer ranges, and are accurate and simple to use. Put the contact
on the work to be measured and push the gage head down until the base
stops at the reference point and take reading. Gages are furnished
with three rounded-end contact points to cover the range. Flat end
contact points are available on special order. |
|
|
|
|
|
|
|
|
|
|
| Starrett
No. |
Range
(in./mm) |
Dial
Reading
(in.) |
Base
Length
(in.) |
Grad.
(in.) |
Catalog
No. |
Price ($) |
|
|
| 643JZ |
0-.125 in. |
0-25-0 |
2-1/2 in. |
.0005 in. |
1-855-52714 |
274.00 |
ADD
TO CART |
| 640JZ |
0-1/2 in. |
0-50 |
2-1/2 in. |
.0005 in. |
1-855-52705 |
291.00 |
ADD
TO CART |
| 640RJZ |
0-1/2 in. |
0-50 |
2-1/2 in. |
.0005 in. |
1-855-52709 |
260.00 |
ADD
TO CART |
| 644JZ |
0-3 in. |
0-100 |
2-1/2 in. |
.001 in. |
1-855-52718 |
299.00 |
ADD
TO CART |
| 644MJZ |
0-75 mm |
0-100 |
64 mm |
.01 mm |
1-855-56027 |
290.00 |
ADD
TO CART |
|
| Prices
subject to change without notice. |
| Back
to Top |
|
|
|
|
|
